MagMovers are used to lift ClikMagnets (+ item to be hung) to metal on the ceiling and to safely retrieve them when it is time to change your display. All while standing on the floor!!
MagMovers have the standard acme thread for attachment to the MagPole or most other threaded poles.
MagMovers are also used to safely take down your item
The corkscrew on the MagMover ‘post’ is used to retrieve your item from the ceiling. The corkscrew is inserted FULLY into the ring of the ClikMagnet, and pulled downward. The curls of the corkscrew holds the item from falling to safely bring it down.
The 20” Dual MagMover is the same width as most drop ceiling tiles. This allows the attachment and removal of two ClikMagnets at the same “Clik” moment – for even faster installs and take-downs.
For use with the Flush Mount Clips, the spacing between attachment points must be 20” – the same width as the 20” Dual MagMover.
For use with the FlatHats, the spacing between the attachments points must be the same 20” – the same width as the 20” Dual MagMover.
For attachment points spaced 25” to 30” apart, the length of line between the ClikMagnet and your item to be hung (the distance between the top of your item and the ceiling) should be 6 inches or longer.
For attachment points spaced 31” to 36” apart, the length of line between the ClikMagnet and your item to be hung (the distance between the top of your item and the ceiling) should be 8 inches or longer.